Exotic Alloys XM-19 Sheets Overview
Zeon Exports supplies Exotic Alloy XM-19 (Nitronic 50, UNS S20910) sheets and plates, a nitrogen-strengthened austenitic stainless steel with a PREN above 34, comparable to duplex 2205, and roughly double the yield strength of standard 316L.
Exotic Alloy XM-19 (Nitronic 50) Sheets & Plates are fabricated into tanks, vessels and structural components for petrochemical and oil field equipment. Its chromium, nickel, manganese, molybdenum and nitrogen composition gives excellent corrosion resistance that outperforms 316L and 317L in many media, combined with roughly double the yield strength of standard austenitic grades.
- PREN >34, on par with duplex 2205, exceeding standard 300-series grades
- Tensile ≥862 MPa, yield ≥379 MPa in the annealed condition
- EN 10204 3.1 certified, export-ready worldwide
Quick Specifications of Exotic Alloys XM-19 Sheets
Exotic Alloy XM-19 (Nitronic 50) Sheets & Plates are produced to internationally recognized specifications.
| Field | Detail |
|---|---|
| Material/Grade | Exotic Alloy XM-19 (Nitronic 50) |
| UNS | S20910 |
| DIN/Werkstoff Number | 1.3964 |
| Standards | ASTM A240 |
| Form | Sheet, Plate, Strip |
| Finish | Hot-rolled, Cold-rolled |
| Heat Treatment | Solution Annealed |
| Certification | EN 10204 3.1 |
Equivalent Grades of XM-19
Alloy XM-19 (Nitronic 50) is recognized under several international designations below.
| UNS | DIN/Werkstoff Number | Common Trade Name | ASTM/ASME Standard |
|---|---|---|---|
| S20910 | 1.3964 | Nitronic 50 / XM-19 / 22-13-5 | ASTM A240 |
Chemical Composition of XM-19
Composition per ASTM A240 for UNS S20910; exact limits can vary slightly by specification and heat.
| Element | Composition (%) |
|---|---|
| Chromium (Cr) | 20.5 – 23.5 |
| Nickel (Ni) | 11.5 – 13.5 |
| Manganese (Mn) | 4.0 – 6.0 |
| Molybdenum (Mo) | 1.50 – 3.00 |
| Nitrogen (N) | 0.20 – 0.40 |
| Niobium (Nb) | 0.10 – 0.30 |
| Vanadium (V) | 0.10 – 0.30 |
| Iron (Fe) | Balance |
Physical Properties of Exotic Alloy XM-19 (Nitronic 50)
Typical physical properties for XM-19; confirm exact heat-specific figures against the mill test certificate.
| Property | Value |
|---|---|
| Density | ~7.9 g/cm3 (typical) |
| Magnetic Behaviour | Non-magnetic (does not magnetize with cold work) |
Mechanical Properties of Exotic Alloys XM-19 Sheets
Minimum mechanical properties for annealed UNS S20910 per ASTM A240.
| Property | Minimum Value |
|---|---|
| Tensile Strength | 862 MPa (125 ksi) |
| Yield Strength (0.2% offset) | 379 MPa (55 ksi) |
| Elongation | 35% |
| Condition | Solution Annealed |
Corrosion Resistance of Exotic Alloy XM-19 (Nitronic 50)
- Exotic Alloy XM-19 Sheets & Plates offer a corrosion profile that outperforms standard austenitic stainless in most media.
- General corrosion resistance: outperforms 316(L) and 317(L) across many chemical environments.
- Pitting and crevice resistance: PREN above 34, comparable to duplex 2205, giving better resistance than 316(L).
- Chloride SCC caution: not recommended for hot chloride ion environments, where it can be susceptible to stress corrosion cracking.
Heat Resistance of Exotic Alloy XM-19 (Nitronic 50)
Exotic Alloy XM-19 sheets and plates retain very good mechanical properties at both elevated and sub-zero temperatures. It cannot be hardened by heat treatment; strength is developed through solution annealing and, where higher strength is needed, controlled hot working. Confirm exact service limits against the governing standard and application before specifying.
Key Properties of Exotic Alloys XM-19 Sheets
Beyond corrosion and heat performance, XM-19 sheets and plates offer these additional properties.
- Roughly double the yield strength of standard 316L
- Good toughness maintained at sub-zero temperatures
- Good weldability using matched filler metal
- Non-magnetic even after cold working
Benefits of Exotic Alloys XM-19 Sheets
Choosing XM-19 sheets and plates from Zeon Exports delivers measurable advantages for your project.
- Duplex-level corrosion resistance in an austenitic, easy-to-fabricate alloy
- Full MTC 3.1 documentation for project QA/QC requirements
- Multiple thicknesses and finishes to match exact project specs
- Reliable bulk supply with consistent ready stock
- Competitive export pricing for large industrial orders
- Fast dispatch to global project sites and ports
Related Products
Explore related Exotic Alloys products from Zeon Exports.
Request a Quote for Exotic Alloys XM-19 Sheets
Ready to source Exotic Alloy XM-19 (Nitronic 50) Sheets & Plates? Share your thickness, standard and quantity requirements and our team will respond with a quote.
Call: +91 98205 33105
Email: info@zeonexports.com
Website: www.zeonexports.com
Address: A-7/9, Saboo Building, Ardeshir Dady Cross Lane, Cawasji Patel Tank Road, Mumbai – 400004
Frequently Asked Questions About Exotic Alloys XM-19 Sheets
Common questions about Exotic Alloy XM-19 (Nitronic 50) Sheets & Plates, answered below.
Q1: What is Exotic Alloy XM-19 (Nitronic 50)?
Ans. Nitronic 50 (UNS S20910) is a nitrogen-strengthened austenitic stainless steel with a PREN above 34.
Q2: What standards apply to XM-19 sheets and plates?
Ans. Sheets and plates are manufactured to ASTM A240, certified to EN 10204 3.1 mill test certificates.
Q3: How does XM-19 compare to 316L?
Ans. XM-19 offers roughly double the yield strength and better pitting resistance than standard 316L.
Q4: Is XM-19 magnetic?
Ans. XM-19 is non-magnetic and does not magnetize with cold work, unlike many standard austenitic grades.
Q5: Is XM-19 suitable for hot chloride environments?
Ans. No, it is not recommended for hot chloride ion environments where stress corrosion cracking risk is elevated.
Q6: What thickness range is available?
Ans. Zeon Exports supplies standard and custom thickness ranges; confirm exact availability against your order quantity.
Q7: What certification is provided with orders?
Ans. Every order ships with EN 10204 3.1 mill test certificates confirming grade, heat and dimensions.
Q8: Does Zeon Exports supply custom sizes?
Ans. Yes, sheets and plates are available cut-to-size on request for bulk industrial orders.




