Exotic Alloys Alloy A286 Sheets Overview
Zeon Exports supplies Exotic Alloy A286 (UNS S66286) sheets and plates, an iron-nickel-chromium precipitation-hardening superalloy combining high strength with good oxidation resistance up to 704°C.
Exotic Alloy A286 Sheets & Plates are fabricated into aerospace structural components, gas turbine hardware and high-temperature fasteners. Its titanium-driven precipitation hardening gives high tensile and yield strength while retaining good oxidation resistance in continuous service up to 704°C, making it a preferred choice wherever standard stainless steel lacks sufficient high-temperature strength.
- Age-hardened via titanium for very high strength
- Tensile ≥895 MPa, yield ≥655 MPa in Class A condition
- EN 10204 3.1 certified, export-ready worldwide
Quick Specifications of Exotic Alloys Alloy A286 Sheets
Exotic Alloy A286 Sheets & Plates are produced to internationally recognized specifications.
| Field | Detail |
|---|---|
| Material/Grade | Exotic Alloy A286 |
| UNS | S66286 |
| DIN/Werkstoff Number | 1.4980 |
| Standards | AMS 5525 (Sheet & Strip) |
| Form | Sheet, Plate, Strip |
| Finish | Hot-rolled, Cold-rolled |
| Heat Treatment | Solution Treated + Aged |
| Certification | EN 10204 3.1 |
Equivalent Grades of Alloy A286
Alloy A286 is recognized under several international designations below.
| UNS | DIN/Werkstoff Number | Common Trade Name | ASTM/ASME Standard |
|---|---|---|---|
| S66286 | 1.4980 | A-286 / Incoloy A286 | ASTM A453 Gr. 660 |
Chemical Composition of Alloy A286
Composition per ASTM A453 Grade 660 for UNS S66286; exact limits can vary slightly by specification and heat.
| Element | Composition (%) |
|---|---|
| Iron (Fe) | Balance (~53% nominal) |
| Nickel (Ni) | 24.0 – 27.0 |
| Chromium (Cr) | 13.5 – 16.0 |
| Molybdenum (Mo) | 1.0 – 1.5 |
| Titanium (Ti) | 1.90 – 2.35 |
| Vanadium (V) | 0.10 – 0.50 |
| Aluminum (Al), max | 0.35 |
Physical Properties of Exotic Alloy A286
Physical properties for A286, confirmed against manufacturer data.
| Property | Value |
|---|---|
| Density | 7.94 g/cm3 |
| Magnetic Behaviour | Non-magnetic (both ST and aged conditions) |
Mechanical Properties of Exotic Alloys Alloy A286 Sheets
Minimum mechanical properties for Class A (solution treated + aged) UNS S66286 per ASTM A453 Grade 660.
| Property | Minimum Value |
|---|---|
| Tensile Strength | 895 MPa (130 ksi) |
| Yield Strength (0.2% offset) | 655 MPa (95 ksi) |
| Elongation | 15% (typical) |
| Condition | Solution Treated + Aged |
Corrosion Resistance of Exotic Alloy A286
- Exotic Alloy A286 Sheets & Plates combine corrosion resistance with high strength retained at elevated temperature.
- Oxidation resistance: stable in continuous service up to 816°C and intermittent service up to 982°C.
- Pitting and crevice resistance: chromium content gives moderate resistance similar to austenitic stainless steel.
- Non-magnetic: remains non-magnetic even after severe cold working, useful near magnetic-sensitive equipment.
Heat Resistance of Exotic Alloy A286
Exotic Alloy A286 sheets and plates perform reliably in continuous service up to roughly 704°C (1,300°F), with oxidation resistance extending to 816°C continuous and 982°C intermittent exposure. Confirm the exact heat treatment condition and service limits against the governing standard before specifying.
Key Properties of Exotic Alloys Alloy A286 Sheets
Beyond corrosion and heat performance, A286 sheets and plates offer these additional properties.
- Very high strength via titanium-driven precipitation hardening
- Good creep resistance at elevated temperature
- Excellent resistance to hydrogen embrittlement
- Good weldability and fabricability for a precipitation-hardening alloy
Benefits of Exotic Alloys Alloy A286 Sheets
Choosing A286 sheets and plates from Zeon Exports delivers measurable advantages for your project.
- Proven aerospace-grade strength at a lower cost than nickel superalloys
- Full MTC 3.1 documentation for project QA/QC requirements
- Multiple thicknesses and finishes to match exact project specs
- Reliable bulk supply with consistent ready stock
- Competitive export pricing for large industrial orders
- Fast dispatch to global project sites and ports
Related Products
Explore related Exotic Alloys products from Zeon Exports.
Request a Quote for Exotic Alloys Alloy A286 Sheets
Ready to source Exotic Alloy A286 Sheets & Plates? Share your thickness, standard and quantity requirements and our team will respond with a quote.
Call: +91 98205 33105
Email: info@zeonexports.com
Website: www.zeonexports.com
Address: A-7/9, Saboo Building, Ardeshir Dady Cross Lane, Cawasji Patel Tank Road, Mumbai – 400004
Frequently Asked Questions About Exotic Alloys Alloy A286 Sheets
Common questions about Exotic Alloy A286 Sheets & Plates, answered below.
Q1: What is Exotic Alloy A286?
Ans. A286 (UNS S66286) is an iron-nickel-chromium precipitation-hardening superalloy strengthened by titanium.
Q2: What standards apply to A286 sheets and plates?
Ans. Sheets and plates are manufactured to AMS 5525, certified to EN 10204 3.1 mill test certificates.
Q3: What is the maximum service temperature?
Ans. A286 performs reliably up to roughly 704°C (1,300°F); confirm the correct condition against your design code.
Q4: Is A286 magnetic?
Ans. A286 is non-magnetic in both the solution-treated and aged conditions.
Q5: Is A286 used in aerospace applications?
Ans. Yes, A286 is widely used for gas turbine and aerospace structural components requiring high strength at elevated temperature.
Q6: What thickness range is available?
Ans. Zeon Exports supplies standard and custom thickness ranges; confirm exact availability against your order quantity.
Q7: What certification is provided with orders?
Ans. Every order ships with EN 10204 3.1 mill test certificates confirming grade, heat and dimensions.
Q8: Does Zeon Exports supply custom sizes?
Ans. Yes, sheets and plates are available cut-to-size on request for bulk industrial orders.




