Exotic Alloys SS 904L Sheets Overview
Zeon Exports supplies Exotic Alloys SS 904L (UNS N08904) sheets and plates, a low-carbon super austenitic stainless steel with copper addition for outstanding resistance to sulfuric acid and chloride environments in chemical processing equipment.
Exotic Alloys SS 904L Sheets & Plates are fabricated into tanks, vessels and bleaching equipment for chemical processing, pulp & paper and flue gas cleaning systems. Its high nickel and molybdenum content, roughly double that of 316L, combined with copper addition gives outstanding resistance to sulfuric acid, pitting and stress corrosion cracking.
- Copper addition gives strong sulfuric acid resistance across concentrations
- Tensile ≥490 MPa, yield ≥220 MPa in the annealed condition
- EN 10204 3.1 certified, export-ready worldwide
Quick Specifications of Exotic Alloys SS 904L Sheets
Exotic Alloys SS 904L Sheets & Plates are produced to internationally recognized specifications.
| Field | Detail |
|---|---|
| Material/Grade | Exotic Alloys SS 904L |
| UNS | N08904 |
| DIN/Werkstoff Number | 1.4539 |
| Standards | ASTM A240 |
| Form | Sheet, Plate, Strip |
| Finish | Hot-rolled, Cold-rolled |
| Heat Treatment | Solution Annealed |
| Certification | EN 10204 3.1 |
Equivalent Grades of SS 904L
SS 904L is recognized under several international designations below.
| UNS | DIN/Werkstoff Number | Common Trade Name | ASTM/ASME Standard |
|---|---|---|---|
| N08904 | 1.4539 | 904L | ASTM A240 |
Chemical Composition of SS 904L
Composition per ASTM A240 for UNS N08904; exact limits can vary slightly by specification and heat.
| Element | Composition (%) |
|---|---|
| Chromium (Cr) | 19.0 – 23.0 |
| Nickel (Ni) | 23.0 – 28.0 |
| Molybdenum (Mo) | 4.0 – 5.0 |
| Copper (Cu) | 1.0 – 2.0 |
| Nitrogen (N), max | 0.10 |
| Carbon (C), max | 0.020 |
| Manganese (Mn), max | 2.00 |
| Silicon (Si), max | 1.00 |
| Phosphorus (P), max | 0.045 |
| Sulphur (S), max | 0.035 |
| Iron (Fe) | Balance |
Physical Properties of Exotic Alloys SS 904L
Typical physical properties for 904L; confirm exact heat-specific figures against the mill test certificate.
| Property | Value |
|---|---|
| Density | ~8.0 g/cm3 (typical) |
| Melting Range | ~1320 – 1390°C (typical) |
| Magnetic Behaviour | Essentially non-magnetic (annealed) |
Mechanical Properties of Exotic Alloys SS 904L Sheets
Minimum mechanical properties for annealed UNS N08904 per ASTM A240.
| Property | Minimum Value |
|---|---|
| Tensile Strength | 490 MPa (71 ksi) |
| Yield Strength (0.2% offset) | 220 MPa (31 ksi) |
| Elongation | 35% |
| Hardness | 90 HB max |
| Condition | Solution Annealed |
Corrosion Resistance of Exotic Alloys SS 904L
- Exotic Alloys SS 904L Sheets & Plates were developed for medium-concentration sulfuric acid and chloride-bearing environments.
- Acid resistance: copper addition makes it useful across all concentrations of sulfuric acid.
- Pitting and crevice resistance: high molybdenum and nickel give strong resistance to chloride pitting and crevice attack.
- Chloride SCC resistance: high nickel content resists chloride stress corrosion cracking that limits standard austenitic grades.
Heat Resistance of Exotic Alloys SS 904L
Exotic Alloys SS 904L sheets and plates are non-magnetic in the annealed condition and offer good toughness at cryogenic temperatures, but are generally selected for moderate-temperature aqueous and chemical service. Confirm exact service limits against the governing standard and application before specifying.
Key Properties of Exotic Alloys SS 904L Sheets
Beyond corrosion and heat performance, 904L sheets and plates offer these additional properties.
- Good toughness at cryogenic temperatures
- Excellent formability and weldability
- Greater resistance to ferrite and sigma phase precipitation than 316L
- Widely used in chemical, oil & gas and pharmaceutical industries
Benefits of Exotic Alloys SS 904L Sheets
Choosing 904L sheets and plates from Zeon Exports delivers measurable advantages for your project.
- Strong sulfuric acid and chloride resistance at moderate cost
- Full MTC 3.1 documentation for project QA/QC requirements
- Multiple thicknesses and finishes to match exact project specs
- Reliable bulk supply with consistent ready stock
- Competitive export pricing for large industrial orders
- Fast dispatch to global project sites and ports
Related Products
Explore related Exotic Alloy products from Zeon Exports.
Request a Quote for Exotic Alloys SS 904L Sheets
Ready to source Exotic Alloys SS 904L Sheets & Plates? Share your thickness, standard and quantity requirements and our team will respond with a quote.
Call: +91 98205 33105
Email: info@zeonexports.com
Website: www.zeonexports.com
Address: A-7/9, Saboo Building, Ardeshir Dady Cross Lane, Cawasji Patel Tank Road, Mumbai – 400004
Frequently Asked Questions About Exotic Alloys SS 904L Sheets
Common questions about Exotic Alloys SS 904L Sheets & Plates, answered below.
Q1: What is SS 904L?
Ans. SS 904L (UNS N08904) is a low-carbon super austenitic stainless steel with copper addition for sulfuric acid resistance.
Q2: What standards apply to 904L sheets and plates?
Ans. Sheets and plates are manufactured to ASTM A240, certified to EN 10204 3.1 mill test certificates.
Q3: Is 904L magnetic?
Ans. 904L is essentially non-magnetic in the annealed condition, being a fully austenitic stainless steel.
Q4: How does 904L compare to 316L?
Ans. 904L has roughly double the nickel and molybdenum of 316L, plus copper, giving much stronger sulfuric acid and chloride resistance.
Q5: Is 904L suitable for seawater service?
Ans. Yes, 904L has high resistance to pitting and crevice corrosion in chloride solutions including seawater.
Q6: What thickness range is available?
Ans. Zeon Exports supplies standard and custom thickness ranges; confirm exact availability against your order quantity.
Q7: What certification is provided with orders?
Ans. Every order ships with EN 10204 3.1 mill test certificates confirming grade, heat and dimensions.
Q8: Does Zeon Exports supply custom sizes?
Ans. Yes, sheets and plates are available cut-to-size on request for bulk industrial orders.
