Nickel Alloys Alloy K500 Pipes Overview
Zeon Exports supplies Nickel Alloy K500 (Monel, UNS N05500) pipes and tubes, an age-hardenable nickel-copper alloy combining Monel 400's corrosion resistance with roughly triple the yield strength for marine and oil & gas piping.
Nickel Alloy K500 (Monel) Pipes & Tubes carry seawater and chemical process streams where high strength and corrosion resistance are both required. Precipitation hardened through aluminum and titanium additions, it retains the corrosion resistance of Alloy 400 while offering roughly triple the yield strength and double the tensile strength.
- Age-hardened via aluminum and titanium for very high strength
- Non-magnetic to as low as –101°C (–150°F)
- EN 10204 3.1 certified, export-ready worldwide
Quick Specifications of Nickel Alloys Alloy K500 Pipes & Tubes
Nickel Alloy K500 (Monel) Pipes & Tubes are produced to internationally recognized specifications.
| Field | Detail |
|---|---|
| Material/Grade | Nickel Alloy K500 (Monel) |
| UNS | N05500 |
| DIN/Werkstoff Number | 2.4375 |
| Standards | Confirm applicable nickel-alloy pipe standard on order |
| Form | Seamless & Welded Pipe/Tube |
| Finish | Pickled & Annealed |
| Heat Treatment | Age Hardened |
| Certification | EN 10204 3.1 |
Equivalent Grades of Alloy K500
Alloy K500 (Monel) is recognized under several international designations below.
| UNS | DIN/Werkstoff Number | Common Trade Name |
|---|---|---|
| N05500 | 2.4375 | Monel K-500 |
Chemical Composition of Nickel Alloy K500
Composition per UNS N05500; exact limits can vary slightly by specification and heat.
| Element | Composition (%) |
|---|---|
| Nickel (Ni), min | 63.0 |
| Copper (Cu) | 27.0 – 33.0 |
| Aluminum (Al) | 2.30 – 3.15 |
| Titanium (Ti) | 0.35 – 0.85 |
Physical Properties of Nickel Alloys Alloy K500
Physical properties for Alloy K500, confirmed against manufacturer data.
| Property | Value |
|---|---|
| Density | 8.44 g/cm3 |
| Magnetic Behaviour | Non-magnetic to about –101°C (–150°F) |
Mechanical Properties of Nickel Alloys Alloy K500 Pipes & Tubes
Typical age-hardened minimums; confirm exact minimums against the applicable standard.
| Property | Minimum Value |
|---|---|
| Tensile Strength | 1000 MPa (145 ksi) |
| Yield Strength (0.2% offset) | 690 MPa (100 ksi) |
| Elongation | 20% |
| Condition | Age Hardened |
Corrosion Resistance of Nickel Alloys Alloy K500
Nickel Alloy K500 Pipes & Tubes retain Alloy 400's corrosion profile while adding significant strength.
- Seawater resistance: excellent resistance to seawater and marine atmospheres, ideal for offshore piping.
- Acid resistance: strong resistance to hydrofluoric acid and reducing acids, inherited from the base Alloy 400 chemistry.
- Non-magnetic: remains virtually non-magnetic down to –101°C, useful near magnetic-sensitive equipment.
Heat Resistance of Nickel Alloys Alloy K500
Nickel Alloy K500 pipes and tubes maintain their strength up to roughly 649°C (1,200°F) and stay ductile and tough at low sub-zero temperatures. Confirm exact service limits against the governing standard and application before specifying.
Key Properties of Nickel Alloys Alloy K500 Pipes & Tubes
Beyond corrosion and heat performance, Alloy K500 pipes & tubes offer these additional properties.
- Roughly triple the yield strength of Alloy 400
- Good galling and wear resistance versus austenitic bolting
- Age hardened after cold working for maximum strength
- Good toughness maintained into low sub-zero temperatures
Benefits of Nickel Alloys Alloy K500 Pipes & Tubes
Choosing Alloy K500 pipes & tubes from Zeon Exports delivers measurable advantages for your project.
- High strength combined with proven Monel-family corrosion resistance
- Full MTC 3.1 documentation for project QA/QC requirements
- Flexible sizing and schedules to match project specs
- Reliable bulk supply with consistent ready stock
- Competitive export pricing for large industrial orders
- Fast dispatch to global project sites and ports
Related Products
Explore related Nickel Alloys products from Zeon Exports.
Request a Quote for Nickel Alloys Alloy K500 Pipes & Tubes
Ready to source Nickel Alloy K500 (Monel) Pipes & Tubes? Share your size, schedule and quantity requirements and our team will respond with a quote.
Call: +91 98205 33105
Email: info@zeonexports.com
Website: www.zeonexports.com
Address: A-7/9, Saboo Building, Ardeshir Dady Cross Lane, Cawasji Patel Tank Road, Mumbai – 400004
Frequently Asked Questions About Nickel Alloys Alloy K500 Pipes & Tubes
Common questions about Nickel Alloy K500 (Monel) Pipes & Tubes, answered below.
Q1: What is Nickel Alloy K500 (Monel)?
Ans. Monel K-500 (UNS N05500) is an age-hardenable nickel-copper alloy with roughly triple the yield strength of Alloy 400.
Q2: What standards apply to Alloy K500 pipes?
Ans. Pipes are manufactured per applicable ASTM nickel-alloy pipe standards, certified to EN 10204 3.1 mill test certificates.
Q3: Is Alloy K500 magnetic?
Ans. No, Alloy K500 is virtually non-magnetic, remaining so down to about –101°C (–150°F).
Q4: What is the maximum service temperature?
Ans. Alloy K500 maintains its strength up to roughly 649°C (1,200°F); confirm exact limits against your design code.
Q5: Is Alloy K500 suitable for seawater service?
Ans. Yes, Alloy K500 has excellent resistance to seawater, widely used in offshore piping.
Q6: Do you supply seamless and welded pipe?
Ans. Yes, both seamless and welded Alloy K500 pipes are available, per project requirements.
Q7: What certification is provided with orders?
Ans. Every order ships with EN 10204 3.1 mill test certificates confirming grade, heat and dimensions.
Q8: Does Zeon Exports supply custom sizes?
Ans. Yes, pipes and tubes are available in custom sizes and schedules on request for bulk industrial orders.
