Duplex Steel Alloy 2304 Pipes & Tubes Overview
Zeon Exports supplies Duplex Steel Alloy 2304 (UNS S32304) pipes and tubes, a lean duplex stainless steel with 23% chromium and 4% nickel, giving corrosion resistance similar to 316L at nearly double the yield strength.
Duplex Steel Alloy 2304 Pipes & Tubes carry process fluids in chemical processing, water treatment and general industrial piping. Its lean composition — high chromium, low nickel, essentially no molybdenum — gives corrosion resistance similar to 316L while delivering nearly double the yield strength, allowing lighter, thinner-walled pipe designs.
- Molybdenum-free composition keeps costs lower than standard duplex 2205
- Tensile ≥600 MPa, yield ≥400 MPa — double that of 316L
- EN 10204 3.1 certified, export-ready worldwide
Quick Specifications of Duplex Steel Alloy 2304 Pipes & Tubes
Duplex Steel Alloy 2304 Pipes & Tubes are produced to internationally recognized specifications.
| Field | Detail |
|---|---|
| Material/Grade | Duplex Steel Alloy 2304 |
| UNS | S32304 |
| Werkstoff Number | 1.4362 |
| Standards | ASTM A789 (Tube), ASTM A790 (Pipe) |
| Form | Seamless & Welded Pipe/Tube |
| Finish | Pickled & Annealed |
| Heat Treatment | Solution Annealed |
| Certification | EN 10204 3.1 |
Equivalent Grades of Alloy 2304
Alloy 2304 is recognized under several international designations below.
| UNS | Werkstoff Number | EN Steel Name | Common Trade Name | ASTM/ASME Standard |
|---|---|---|---|---|
| S32304 | 1.4362 | X2CrNiN23-4 | SAF 2304 / Alloy 2304 | ASTM A789/A790 |
Chemical Composition of Alloy 2304
Composition per ASTM A789/A790 for UNS S32304; exact limits can vary slightly by specification and heat.
| Element | Composition (%) |
|---|---|
| Chromium (Cr) | 21.5 – 24.5 |
| Nickel (Ni) | 3.0 – 5.5 |
| Molybdenum (Mo), max | 0.60 |
| Nitrogen (N) | 0.05 – 0.20 |
| Manganese (Mn), max | 2.50 |
| Carbon (C), max | 0.030 |
| Silicon (Si), max | 1.00 |
| Phosphorus (P), max | 0.040 |
| Sulphur (S), max | 0.030 |
| Iron (Fe) | Balance |
Physical Properties of Duplex Steel Alloy 2304
Physical properties for Alloy 2304, confirmed against manufacturer data.
| Property | Value |
|---|---|
| Density | ~7.80 g/cm3 |
| Melting Range | Confirm against applicable datasheet |
| Magnetic Behaviour | Magnetic (ferrite phase present) |
Mechanical Properties of Duplex Steel Alloy 2304 Pipes & Tubes
Minimum mechanical properties per ASTM A789/A790 for UNS S32304.
| Property | Minimum Value |
|---|---|
| Tensile Strength | 600 MPa |
| Yield Strength (0.2% offset) | 400 MPa |
| Elongation | 25% |
| Hardness | 290 HB max |
| Condition | Solution Annealed |
Corrosion Resistance of Duplex Steel Alloy 2304
- Duplex Steel Alloy 2304 Pipes & Tubes offer corrosion resistance broadly comparable to 316L thanks to their high chromium content.
- Pitting resistance: PREN of roughly 24–26, moderately above 316L, suited to mild-to-moderate chloride exposure.
- Crevice resistance: good performance at flanged and threaded joints in non-severe chloride environments.
- Chloride SCC resistance: its duplex structure resists stress corrosion cracking better than austenitic 304/316 grades.
Heat Resistance of Duplex Steel Alloy 2304
Duplex Steel Alloy 2304 pipes and tubes are generally suited to continuous service up to roughly 300°C, similar to other duplex grades, with industry guidance cautioning against extended high-temperature exposure to avoid embrittlement risk. Confirm exact service limits against the governing standard and application before specifying.
Key Properties of Duplex Steel Alloy 2304 Pipes & Tubes
Beyond corrosion and heat performance, Alloy 2304 pipes and tubes offer these additional properties.
- Nearly double the yield strength of 304/316 austenitic stainless
- Good weldability using 2304 or 2209 matching filler metal
- Better stress corrosion resistance than 304/316 in chloride solutions
- Lower alloy cost than molybdenum-bearing duplex grades
Benefits of Duplex Steel Alloy 2304 Pipes & Tubes
Choosing Alloy 2304 pipes and tubes from Zeon Exports delivers measurable advantages for your project.
- Cost-effective upgrade path from 316L with real strength gains
- Full MTC 3.1 documentation for project QA/QC requirements
- Flexible sizing, schedules and finishes cut to project requirements
- Reliable bulk supply with consistent ready stock
- Competitive export pricing for large industrial orders
- Fast dispatch to global project sites and ports
Related Products
Explore related Duplex Steel products from Zeon Exports.
Request a Quote for Duplex Steel Alloy 2304 Pipes & Tubes
Ready to source Duplex Steel Alloy 2304 Pipes & Tubes? Share your size, schedule and quantity requirements and our team will respond with a quote.
Call: +91 98205 33105
Email: info@zeonexports.com
Website: www.zeonexports.com
Address: A-7/9, Saboo Building, Ardeshir Dady Cross Lane, Cawasji Patel Tank Road, Mumbai – 400004
Frequently Asked Questions About Duplex Steel Alloy 2304 Pipes & Tubes
Common questions about Duplex Steel Alloy 2304 Pipes & Tubes, answered below.
Q1: What is Duplex Steel Alloy 2304?
Ans. Alloy 2304 (UNS S32304) is a lean duplex stainless steel with 23% chromium, 4% nickel and essentially no molybdenum.
Q2: What standards apply to Alloy 2304 pipes?
Ans. Pipes are manufactured to ASTM A789/A790, certified to EN 10204 3.1 mill test certificates.
Q3: How does Alloy 2304 compare to Alloy 2205?
Ans. Alloy 2304 has a lower PREN (~24–26 vs 34–38) and no molybdenum, making it a lower-cost alternative for less severe chloride service.
Q4: Is Alloy 2304 suitable for chloride service?
Ans. It suits mild-to-moderate chloride exposure similar to 316L; for more aggressive chloride environments, Alloy 2205 is recommended.
Q5: Is Alloy 2304 magnetic?
Ans. Yes, like other duplex grades, Alloy 2304 is magnetic due to its ferrite phase content.
Q6: Do you supply seamless and welded pipe?
Ans. Yes, both seamless and welded Alloy 2304 pipes are available, per project requirements.
Q7: What certification is provided with orders?
Ans. Every order ships with EN 10204 3.1 mill test certificates confirming grade, heat and dimensions.
Q8: Does Zeon Exports supply custom sizes?
Ans. Yes, pipes and tubes are available in custom sizes and schedules on request for bulk industrial orders.
